The Top 5 Reasons People Thrive In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

upvc window repairs near me windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window repair is difficult to open or if it opens in an ease. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's easy to change the hinges on a window, UPVC window repairs but it's easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and UPVC Window Repairs closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. If they are damaged beyond repair, it may be required to realign them. Second, the interlock can also become unbalanced. This is located on the hinge side and might require to be cleaned. In certain instances it is possible to replace them.

The next common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more economical to replace them than repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.