The 10 Most Terrifying Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, you will need to locate some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you're planning to try to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the Window repair. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window repair. However, with time, they can suffer from a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows to get at the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in the right place.

If you aren't able to move the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. The first step is to close your window and do an initial test fit. The corner joints of the sash must align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease, it may be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to offer advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become disaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances it might be necessary to replace them.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.