20 Things You Should Know About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of your window, tighten the screws to secure them in place.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or Upvc Window Repairs is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is easier to do if you have someone to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This can cause an opening to appear where the sash joins the frame. If they are beyond repair, it might be required to realign them. In addition, the interlock could be disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc window repairs near me windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and eventually, they will reach an point at which it is more economical to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.