17 Reasons To Not Beware Of Repairs To Upvc Windows

Repairs to upvc window Repair Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this instance, you will need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

If you're planning attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is large, you might think about an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can access the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. The first step is to close the window and then perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It's easy to change the hinges on a window however it is easier if someone helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, creating gaps between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. Second, the interlock can also become unbalanced. It is located on the hinge's side and upvc window Repair might require to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.