17 Reasons Not To Not Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame of the previous one easily. However If windows with double panes are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and window repairs eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is significant, you may need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a number of problems such as sliding. A sagging uPVC window can cause problems with light, Window Repairs draughts, and even security. It's crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll have to open the window to get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you're satisfied with the fit, you can tighten the screws until they remain in place.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need close the window and then perform a test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be applied. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. This can be easily fixed by a upvc window repairs window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges that are at the fault. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to offer assistance.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. These can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window and can also become misaligned, again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be put on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional immediately.