15 Terms That Everyone Within The Replacement Upvc Window Handles Industry Should Know

Replacement Upvc Window Handles

Most replacement windows handles made of upvc window handle replacement include everything you need. However should you find that your old handle was secured with pins or screws they will need to removed. Then, remove the'snap-in' cover on the handle's base.

The next step is to identify the type of window and lock that your new handle is for It is essential!

Espag

Espag handles are a set of multipoint locks suitable for casement windows like uPVC or wooden double glazing. The handle is fitted with a 7mm square shaft that fits into a gearbox on the uPVC window. When the handle is turned it will activate a series of locks around the perimeter of the window. Espag handles, also referred to as shootbolts, give more security than the single point locks found on older frames.

There are many choices available with cranked and inline handles that can be operated with either the left or right hand. You can also find ergonomic handles that enhance the appearance and feel of your window as well as handles.

If you're planning to replace your current uPVC window handle with an espag type handle, you'll have to determine the size of the spindle that is installed and measure it from the base of the handle to ensure you get the right replacement. This measurement is known as step height and can help you find the perfect uPVC handle for your home.

You may have to remove any screw covers that are protecting the screws that hold the handle in place and if that's the case, you can use the screwdriver or pliers to remove the pins that hold the handle. After this is done, you will need to remove the handle from the frame by taking out the screws or pins that secure the spindle, and then taking it away from the window.

After removing the handle you can access the locking mechanism in the frame of the windows. You can then remove the cockspur block attached adjacent to the handle. This will allow the window to be opened. The replacement uPVC window handles you have ordered should now be able to fit onto the wedge block of the cockspur and then into the spindle for the handle which will allow the window to be opened again. If you want to make sure that your uPVC handles are securely secured you should replace the cockspur block an entirely new one.

Cockspur

Cockspur handles are found on older uPVC or aluminum windows. The handle is closed and then turns into a wedge-shaped plastic catch. (Not to be confused with timber latches, which are also covered in this section.) The handles are available in lockable and nonlockable versions. They come in a range of different nose heights to suit the existing frame.

The handle locks by a slender spur (little triangle bit) pulling against a plastic wedge that is fixed to the frame. They are usually one-way handles, however a deadlock lock cylinder that locks is a possibility to add security.

Similar to Espag handles, the replacement handles for cockspur handle are simple to install all you need is an additional set of screws (supplied) and the proper backset. The backset is the distance that runs from the baseplate of the window to the underside of the nose of the handle. Aluminium window frames are usually 9mm wide, while UPVC is 21mm wide. There are a variety of other options however it is essential to measure the handle prior to buying the handle (see video below for how).

The spindle, or in some instances the entire handle can be removed by removing the handle. The replacement handle can then be screwed into place with two pozidriv screws. The pozidriv screw is available in a brass or zinc finish to match the existing hardware. There is also an option of self-locking pozidriv screws.

This cockspur handle is simple to install and is perfect to repair or replace old uPVC Windows. They are a universal design that makes them suitable for all profiles and backsets. Each handle is equipped with three packers, each having different thicknesses. They are slid on the underside of handle noses and can be combined to make backsets as tiny as 9-13mm or as high as 21mm. The handles are available in left and right-handed versions and are available in lockable and nonlockable models. They are also available with a variety of nose heights.

Tilt and turn

Tilt and turn windows are a premium European window style that has been used for decades in Europe but is beginning to gain traction in the United States. They combine the advantages of three different window styles into one: tilt, pivot and in-swing. This makes them perfect for older homes since they can be used to provide a greater level of ventilation than standard window types.

When in the closed position, tilt and turn windows lock like a normal fixed window. By turning the handle 90° or 180°, based on the type of tilt-and-turn window, the sash will open to the outside and the window will tilt inwards to allow air exchange. This is a great solution to allow ventilation without having to open a large windows, which can be a safety risk if it is not secured properly when opening.

If the handle is turned a further 90@ or 180@ the sash will be fully opened, much like the door. This allows for complete air circulation, which is particularly useful for rooms that are smoky or where smoke or other odors can build up. It also makes cleaning the outside of the glass much easier since it can be done inside the home - a job that usually requires ladders that are a bit shaky.

Tilt and turn windows are very secure. When locked in the closed position they are difficult to open from outside, and they have double glazing replacement window seals that prevent rainwater from getting into the home when in the tilted or in-swing position. This is a helpful feature for older homes, where burglars are more likely to target windows that are opened from the side hinges.

Spade

There are a variety of handles that can be put in on upvc double-glazed windows. The two main types are Espag handles and Cockspur handles. There's also tilt and turn handles blade or spade handles, and monkey tail handles. The type of handle you choose will depend on the style you prefer and the type of window you have.

To select the correct replacement for your window handle, it is important to know how your existing handle is fixed to the frame. This is known as handing, and it is an important piece of information to know when buying online. Some handle designs do not fit all windows. Certain cockspur handles, as an example, are angled while others are straight and can turn left or right. You'll also need the spindle's size which is the distance between the base of handle and the head of handle.

Another aspect to consider when choosing the correct handle is knowing whether your windows need a restrictor or not. They are usually used in high-rise flats or commercial buildings, but are not a requirement for homes that are primarily residential. Also, you should consider the step height, which is the distance between the screw plate and the nose of the handle.

Spade comes from Old English spadu, residential spaedu or spada and has been translated into many languages, including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City, spade began to be used as a sexist term for black people. Spade has since risen to prominence in pop culture and is now a well-known symbol of African American heritage and pride.

It is important to get the right size when replacing a Cadenza-style handle. Handles are available in straight and angled styles that differ by just a few microns. The handle head can vary between a D and a T-shaped shape, or have no handles at all.