10 Misleading Answers To Common Repairs To Upvc Windows Questions Do You Know The Right Ones

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door Window Repairs is large, you might want to use a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll need to open the window to get to the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the old caulking might need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your upvc window repair window is difficult to open, or if it blows open with an ease. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. Changing a window hinge is an easy process, but it's simpler with someone else to help hold the frame in place.

Make sure that the uPVC hinges open and close in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to offer suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear between the sash and the frame. They can be repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window, window repairs may also become misaligned, again it may be possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as you can.