Quiz: How Much Do You Know About Replacement Window Handle

Choosing uPVC replacement sash windows Window Handles

Almost all customers agree that the windows handles made of upvc are easy to install and feel as good quality. However, it's important to know that the kind of handle you select is the one that's right for your window.

The height of the step is the most crucial factor. This is the distance between the handle and the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can buy a variety of replacement upvc handles. They are available in a variety of styles and colors, so there is sure to be something that will fit your windows. It's easy to impulse buy especially when the handle breaks so it's best to take your time and check certain things prior to committing to buying a replacement. The first step is to be aware of the type of handles made from upvc you have and what the differences between them. The table below lists the most common handles to help you identify the one that is suitable for your windows made of upvc.

Espag handles are the most common and are found on most modern double glazed windows. They are usually affixed to the frame using two screws that are screwed in from both above and below.

They have a spindle bar at the back that can be of a variety sizes. This will determine how they work (either left or right handed). This is why it's important to take a measurement of the handle you have in order to make sure you're ordering the correct replacement.

Usually, they are fixed with two bolts similar to the Espag handle but they have a lower projection from the frame which means that the arm will not poke through your blinds. This is a great option for blinds on your windows made of upvc and you want to make sure the handle will blend in with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge that sits on the frame of the window. This kind of handle is typically found on older windows made of upvc as well as on some wooden windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing on the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or step across the garden fence. They are also a great option for those who have limited mobility, and can improve security and access in the home.

Tips and tips and

There are a variety of different types of uPVC window handles, and lots of people will need to replace them at some point. It is essential to know some tips and tricks to make the job easier.

Check what type of handle is located at your residence. Depending on what the handle is connected to and the locking mechanism it utilizes, it may be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll have to replace them as well as the handle.

Thankfully, most uPVC handles are similar and conform to industry standards for size, which makes replacing them a fairly easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. After these screws are removed, you can remove the handle.

If you've got the handle separated it is a good idea to make an inventory of how much of the spindle protrudes from the base of the handle. This will enable you to measure the length of the spindle to determine a replacement handle. To do this, simply determine the length of the square peg that sticks out from the bottom of the handle and use this as a reference.

This is especially important for inline uPVC windows handles, as they are always straight and will only open to the left or right. They will not work in the middle. It's a good idea in the event that you're not certain of the type of handle you have at your home to borrow a handle and check out how it works.

You can also determine the handiness of a uPVC window by watching the way the handle turns when it is used. Handed handles can be turned either clockwise or counter-clockwise. If you aren't sure you are, ask someone else to open the window using the handle and observe what happens.

Find the spindle's measurement.

The selection of the right replacement handle for your windows could be a bit difficult since not all handles are the same size. It is important to measure the spindle accurately when fitting the new handle. This will ensure that the handle is suitable. There are several different types of uPVC window handles, and they work in different ways, therefore it is crucial that you know which kind of handle you have as well as the type of locking system that you are using.

The spindle of the handle extends out from the handle's rear and is connected to the lock gearbox inside the window frame. When you turn the handle, this is then a way to turn the lock in the gearbox, allowing you to open the window. They are used on uPVC windows with casement. They can be locked using keys for extra security.

Cockspur handles feature an "nose" which closes over a wedge-shaped striker block on the frame. They are commonly found on older double-glazed uPVC windows. They are also quite simple and they can be locked using keys. It can be more difficult to replace these handles as they are not as popular as the handles made of espagnolette.

If you have an open tilt and turn uPVC window then you will require a particular kind of uPVC replacement handle with a different locking mechanism. It can open the window by tilting it, but also turn it around to fully open it. You must choose an opening handle that has an opening of at least 55mm to be able to reach the window frame.

You can use the same procedure to remove and replace this type of uPVC handle, however you'll need to be cautious when removing the old one. It is possible to open the window wider than usual to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and verified that they are in the proper position then tighten the screw covers and test to ensure the lock is working correctly.

Install the new handle

When you have the proper replacement handle it is easy to screw in place. It will require a screwdriver, and an electric one might be easier. It is essential not to overtighten the screws before screwing them in. This could cause the handle or knob to warp.

Inserting the spindle is the second important step to attach the new handle. This is the component that runs through the handle and is responsible for operating the locking mechanism inside the window. It is essential that the component is properly fitted to permit the window to open and shut securely.

There are many different kinds of uPVC window handles. They include:

Espagnolette Handles - These are inline handles that can be used on windows that tilt and turn to open the window.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved design that can be useful for hard-to-reach windows.

Tilt and turn handles They are used to operate the opening and closing mechanisms when tilting and move windows.

The majority of uPVC window frames are fitted with these. They are often called 'Bay Windows' in the UK.

It can be very frustrating If your uPVC handle breaks. There is no need to change the entire uPVC windows because of a damaged window handle. There are several simple ways to repair or replace a broken uPVC window handle.

You can repair your broken window handle swiftly by identifying the type and measuring the spindle. It is important to take your time and prioritise security when working with windows or tools, but this is a relatively simple task. It can make all the difference between having a safe and secure home, Glazed or a vulnerable easily opened window! Bridgewater Glass is the place to visit if you have any questions or need to speak with an expert regarding replacing your window handle. Our team is skilled and knowledgeable to assist you with any issues.