Window Repair: A Simple Definition
Window Repairs
Window repairs can help homeowners save money and keep their homes warm. In the event of serious damage, such as broken glass or a shattered frame, a replacement window may be required.
But there are many other issues that can be fixed to prolong the lifespan of your windows. Some common problems include:
Cracked or broken panes
It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked window glass is not only ugly, but it can also result in higher electricity bills as the broken pieces let cold air into your home. Luckily, it's typically easy to repair windows that have damaged panes.
Begin by carefully removing glass with gloves and safety glasses. You may have to make use of a utility knife in order to remove any remaining putty or old glazing compound around the edges of the frame. Next, use a soft cloth or paper towel to clean the surface of both the glass and wood of the frame.
After cleaning the area, apply silicone caulking that is waterproof to the frame's edges. This helps prevent water from getting into the crack, which could cause further damage to both the frame and the glass.
A crack that is severe in double-paned glass can cause gas to leak between the panes, which can make your windows less insulative. If the crack is severe enough to threaten the quality of the glass or in the case of an inner pane completely missing, it might be time to call in a professional.
Cracks caused by thermal stress can occur when there is a drastic difference in temperature both inside and outside your home. This causes the glass to expand and shrink. If the cracks are located on two sides of a window, it is best to replace it rather than try to repair it.
For cracked windows that aren't yet ready to be replaced Clear tape can do a decent job of securing the crack and preventing bugs from entering cold air. You can even cut an area of nylon stocking or tarp that's sufficient to cover the crack, and glue it in place with duct tape. This isn't a permanent solution however it can be useful in a pinch and it keeps insects and cold air from entering your home. If your windows are old and you're beginning to notice cracks in the glass, it's recommended to consult with the local window repair company to determine if replacing the entire window could be the best solution for you.
Rotten Wood
Wood rot is a common problem for windows. It can alter the appearance of a house and can also be an hazard to safety. It is possible to repair damaged wood. First, you will need to ensure that the cause of the rot has been addressed. This can be done by checking for leaks in the roof or gutters that are not functioning cracking caulking, and any other areas that allow water to enter the wood.
The next step is to remove the rotten parts of the window frame. This can be done with a claw hammer, chisel, or rasp. After the rotten areas have been removed then you must replace them with new wood. Pre-treated wood is suggested for this task, since it will resist the onset of rot. If you cannot replace the rotted timber you can apply filler and wood hardener to repair the damaged area. This kind of product can be available at most hardware stores. To get the best results, follow the directions on the label.
Once you have repaired the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant the wood. A product such as Sikkens is a good choice for this task.
Use a two-part epoxy in order to protect the wood against further damage. This product is easy-to-apply and leaves a beautiful finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried, you are able to rub the wood's surface. It is best to start with a rough layer of sandpaper, and then progress to a smoother grade.
You do not want to expose the damaged part to further moisture. It is recommended, so, to protect the surface you have repaired with an oil-based prime that will protect it from moisture. After that, you are able to apply the wood sealant, which is waterproof.
It won't open
A window that isn't opening can be the result of various reasons. Wood frames can warp during wet weather, the house could have settled or someone could have nailed it shut for security reasons. With a little patience and the right tools you can open the majority of stuck windows.
Gunk or debris that has accumulated can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, hinges, and locks. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Spray grease on these areas will aid in preventing oxidation and help keep your windows operating properly.
The pulleys that raise or lower the window can be loosened, or break. These components may lose tension and cause obstruction particularly when the window is situated at least two stories above the ground.
If you have trouble opening a door, Window repairs try using a pry-bar to gently open the window. Place a wood block on the frame to give the pry bar more leverage. Also, be careful not to damage the window or the wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.
A damaged spring can be the cause of windows that don't raise or lower. You'll need to refer to the owner's manual for more details depending on the person who made your windows.
If you've tried cleaning the moving parts of your windows and lubricating them but they're still unable to open it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let windows in your home become functional to inoperable. A window that isn’t properly shut could make your home vulnerable to burglary and water damages. Contact our team today for more information about our replacement windows and our services!
