10 Things Everyone Hates About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, Upvc window repair and the new one will generally fit within the frame that was previously installed easily. However when windows with double panes are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap between the window and the door is substantial, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your Upvc window repair window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. After that, Upvc Window repair using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close the window and perform a test fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges at the fault. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is essentially a very simple procedure, but it is easier when you have a person to help you hold the frame up.

Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. In addition, the interlock could be disaligned. This is located on the hinge side and may need to be cleaned. In some instances it might be necessary to replace these.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.