15 Funny People Who Are Secretly Working In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need find some plastic spacers that will help the new pane to fit correctly into the window repairs frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is large, you might need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need to open the window to get to the frame. Then, remove both the hinges on the top and upvc window Repairs bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's crucial to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be hinges that are at fault. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like all mechanical parts hinges will wear out over time. It's easy to change the hinges on a window, but it's easier if someone helps hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused by opening the window repairs improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, creating gaps between the frame and sash. They can be repaired by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it's possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the windowsill on top. They can help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc you should consult a professional immediately.