The 10 Most Dismal Double Glazing Lock Repairs Mistakes Of All Time Could Have Been Prevented

Double Glazing Lock Repairs

The use of high-quality locks on your windows and doors can stop burglars from gaining access to your home. In general, they don't enjoy breaking glass or squeezing through open windows.

However, some double-glazing owners have experienced issues with their door lock or window lock after it was installed. Luckily, these problems are usually fixable and don't require to purchase new double glazing.

Broken or Faulty Locks

If your uPVC door or window lock is broken or faulty, then a locksmith can fix it. They can fix the striker plates, hinges and locks on your double glazing. They can also move the cylinder around to fix any misalignment problems that could be causing the handle to not function properly.

If the key fits into the lock but it won't turn or is difficult to insert the mechanism might be stuck. The dirt or grease could be trapped in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is crucial to make use of a dry lubricant such as teflon or pvc graphite, rather than oil, which attracts dirt and stick to the interior of the mechanism. After lubricating the lock, you must insert the key and try to turn it. The lubricant will work its way through the mechanism, and the lock should be able to turn with ease.

Loose screws within the lock mechanism are another reason for a malfunctioning lock. They can loosen and fall out or break off completely which can stop the lock from working properly. The screws can be tightened using a screwdriver, but be cautious not to tighten them too much. This could cause damage to the internal components.

A damaged lock can be dangerous for your family and you. This is especially relevant if you have young children. They can easily unlock the door without your knowledge which gives them access to your home. If you're worried that this could occur, a professional locksmith can help to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or broken

Many double-glazed windows have the multi-point lock as part of the overall security package. This is an excellent option for those concerned with opportunistic thieves looking to gain entry to your home. It's also worth asking your installer about anti-lift blocks, these can be fitted on top of the locks that are already in place to will keep your window repairs near me secured in its closed position.

It's not uncommon for the handles to be damaged or fail. They are the first part of your window that could be pushed open by criminals intent on breaking into. The good news is, this is among the easiest parts to fix.

Modern uPVC handles and aluminum handles are equipped with a multi-point locking mechanism known as Espagnolette which is designed to ward off forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional extra on new double glazed windows.

If a handle is defective, it's important to get this repaired as quickly as possible. Handles that are damaged can prevent the window from closing properly and also allowing drafts to enter. It could be a weakness that burglars who are opportunistic could exploit, putting your family and belongings at risk of being stolen.

The process of fixing the failed mechanism starts with getting access to the window frame and removing the broken handle. The gearbox that opens the handle is located and the model is identified, so that a replacement may be found that matches the profile of the internal window frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. We recommend replacing them with more long screws since they provide a more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further rust. Once that's done the window will be fully operational again and at only a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows aren't shut correctly, draughts may enter your home, the security barriers will become weaker and you run the risk of damp or water damage. Windows hinges that break or become faulty are a common problem and can be fixed easily.

If you have a window made of uPVC that isn't able to open or close and close, it's likely that your hinges are damaged or broken and require replacement. Most window companies will require you to buy an entirely new window unit in order to address this issue, but we can replace the hinges in order to save you money.

Window hinges are often damaged by repeated use, or they are weakened over time by corrosion. If you've got a broken window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not forcing the window to close or open.

Identifying your hinge type will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with an expert in this situation to avoid the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

Faulty hinges are a major issue for uPVC windows and doors. They can be the main source of noise, and can also permit water to enter your windows.

To fix this issue, first make sure whether the pin barrel on both sides of the hinge is aligned. If it's not, tap the head pin with the hammer to create an arc in the hinge barrel. This will help to keep the pin in place. Ask a second person to hold the door while you remove the hinges and hinge screws from both the doorjamb and the door. Replace the hinges using those that are the same size and install the screws with glue. After the glue is drying, fix the hinges by using clamps or weights.

Once the hinges have been fixed, you should be able to install the door and attach the handle. It is a good idea to replace the screws using the same length of dowels as the original screw so that they match up with each the other.

Broken or damaged glass

uPVC Windows can become damaged over time, even though they are great at keeping out the cold and retaining heat. This can be the case with broken or damaged glass as well as defective locks. This is a problem that can be costly if not addressed. It also can detract from the aesthetics of your house and could lead to a loss of insulation, so it's crucial to repair any damage as soon as you can.

You can repair your cracked glass by yourself if you have the appropriate tools and techniques. Be sure that the area around the broken glass is clear of debris to ensure that pieces of glass do not cause injuries or cause a trip hazard. Remove all broken glass pieces and dispose of them in a proper manner. Then, put masking tape to the entire area to keep fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane glass, it's a good idea fit the glass pane before gluing it back into place so that you are sure you'll have enough space complete the project.

Before applying the glue clean the entire surface of the broken frame and the glass with an unclean, dry cloth. Follow the instructions for application and curing times which may differ from one product to the next. Based on the degree of the crack you may want to secure the glass in place during curing. This can be done using lightweight clamps designed to hold delicate materials.

After the adhesive has completely cure, carefully insert the glass inside the window frame. Make sure that it is aligned with the frame's edge and that there aren't gaps between the glass sash and frame. Be careful not to bend the window as it's being installed, as this could weaken the seal and cause condensation and water infiltration.

If you have a glass door repair that's completely broken or has larger cracks, call a professional glazier like O'Brien(r) to arrange an exchange. Unattended handling of broken glass can cause danger to pets and pvc children and is why it's important to act quickly.