10 Myths Your Boss Has About Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.
It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. If you have double glazed window repairs near me-paned windows which are joined by internal beading, it will be harder to remove and window repair replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that will help the new pane to fit perfectly into the frame of the window.
If you're planning to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.
It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is substantial, you may need to consider an alarm system that includes windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.
Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll have to open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of your window, tighten the screws to hold them in the right position.
If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.
3. Water Leaks
If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. Most of the time, upvc window repair near me window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window Repair repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.
It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.
Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely the problem is related to the seal, not the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or slack and blow open in a breeze, it may be hinges at fault. They can be replaced by any competent DIYer and are usually completed in just a few minutes.
Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier if you have someone to help you hold the frame up.
Verify that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you advice.
It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, window repair again due to wear and tear could become misaligned. This causes an opening to appear where the sash joins the frame. If they're beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it is possible to just give them a good clean, but in some cases it might be necessary to have these replaced.
These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce draughts.
Lastly, one of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking cold air.
Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc you should consult a professional immediately.
