The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor upvc window Repair and could be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, upvc window repair you may want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they are susceptible to a range of issues like sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll need to open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and perform an initial test fit. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your Upvc Window Repair windows are brittle to open, or slack and blow open in a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window repair near me should be opened.

The problem can be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges due to wear and tear could become misaligned. This can cause gaps to develop where the sash joins the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window and can also become misaligned, again it is possible to give them a good clean, but in some instances it could be necessary to have these replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.