17 Signs That You Work With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you are going attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in the breeze. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

Verify that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to provide suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window repairs near me.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also due to wear and tear may become displaced, which causes an opening to appear where the sash joins the frame. If they're beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a clean but in some cases it might be necessary to get them replaced.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time, UPVC window repairs and let air escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. These will help to keep cold air out and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.