Guide To Replacement Upvc Window Handles: The Intermediate Guide To Replacement Upvc Window Handles

Replacement Upvc Window Handles

Most replacement upvc windows handles come with everything you require. However should you find that your old handle was held in place by screws or pins, they will need to removed. Then, you need to remove the snap-in cover that is on the handle's base.

You will then need to identify what type of window lock and handle you want to replace. This is vital!

Espag

Espag handles are a multipoint lock system that is used to secure casement windows, such as uPVC and wooden double glazing. They come with a 7mm square spindle that fits into the gearbox on a uPVC window and when the handle is turned, it opens an array of locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles and offer extra security compared to the standard single point lock that is found on older frames.

They are available in a range of different styles, such as inline and cranked designs that can be used in left or right hand operation. You can also find ergonomic handles that enhance the look and Replacement Upvc Window Handles feel of your window, as well as the handle.

If you are looking to replace your existing uPVC window handle with an espag handle, you will need to identify the size of the spindle that is installed and measure the measurement from the base of the handle to ensure you purchase the correct replacement. This measurement, referred to as the step height will assist you in selecting the best uPVC window handle for your home.

If you require to remove screws that secure the handle, use the screwdriver or pliers. After removing the pins or screws that secure the spindle, you can disassemble the handle.

When you have the handle removed, you'll be capable of accessing the locking mechanism within the frame of the window. You can then remove the wedge block cockspur that is placed next to the handle in order to allow the window to open. The replacement uPVC window handles you've purchased should be able to fit onto the cockspur wedge block and then into the spindle of the handle which will allow the window to open again. It is recommended to replace the cockspur wedge block with an entirely new one when you change your uPVC handle to ensure it is securely secured.

Cockspur

Cockspur handles are usually found on older uPVC and aluminium windows. The handle closes and turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) The handles are available in lockable and nonlockable models. They come in a range of different nose sizes to match the frame.

The handle is locked by a small triangle-shaped spur (spur) that is attached to the frame. They are typically one-way handles however the deadlock cylinder with a locking mechanism can be added for extra security.

Similar to Espag handles, the replacement double glazed window handles for cockspur handle are simple to install, all you need is new screws (supplied) and the proper backset. The backset is the distance from the baseplate of the window to the underside of the handle's nose. Aluminium window frames are usually 9mm wide, while UPVC is 21mm wide. There are a myriad of variations however it is essential to measure the handle prior to purchasing the handle (see the video below for more details on how).

This type of window handle can be substituted by simply unscrewing the existing handle and removing the spindle, or in some cases, the entire handle. The replacement handle is then installed by using a pair of pozidrivs screws. The pozidriv screws are available in zinc or brass finishes to match the existing hardware, and there is the option of a locking version that self-locks.

This is an easy to install cockspur handle replacement that is perfect for repairing or replacing old uPVC windows, they have a universal design, making them suitable for all profiles and backsets. Each handle is equipped with three packers, each of different thicknesses. They are slid on the underside of handles and can be used together to create backsets as small as 9, 13mm, or as high as 21mm. They are available in right and left handed versions, and are available with nonlockable or lockable models, with a range of nose heights.

Tilt and Turn

The premium European window style of tilt and turn has been in use in Europe for decades, but it's only just beginning to take off in the American market. They combine the functionality of three window styles into one: tilt, pivot, and in-swing. This makes them perfect for older homes since they can be used to offer more ventilation than traditional window types.

When tilt and turn windows are closed, they lock like any other fixed window. By turning the handle either 90or 180 degrees, based on the tilt-and-turn type of window the sash opens inwards and the window tilts inward to allow air to circulate. This is a great option to let air circulate without the need to open a large window which could pose a safety risk if not properly secured when opening.

The sash is also able to be fully opened by turning the handle 90° or 180°@. This permits complete air exchange, which is particularly useful in rooms with a lot of draft or where smells or smoke can accumulate. It also makes cleaning the exterior of the glass much more easy as it can be done inside the home - a job that usually requires precarious ladders.

Tilt and turn windows are also extremely secure. When locked in the closed position they are difficult to open from the outside, and they have double seals that prevent rainwater from entering the house when they are in the tilted or replacement upvc window handles in-swing position. This is a helpful feature for older homes where burglars are more likely to target traditional windows that can be opened via the side hinges.

Spade

There are several different types of handles that can be installed on upvc double glazed replacement windows-glazed windows. The two most popular kinds are Espag handles and Cockspur handles, then there's also tilt and turn handles blade or spade handles, and monkey tail handle. The type of handle you select will depend on your preferences and the kind of windows you have.

To choose the appropriate replacement for your upvc window handle, you need to know how your current handle is attached to the frame. This is known as handing and is a crucial aspect to know, particularly when buying online as some handles aren't suitable for all windows. Certain cockspur handles, as an instance, are angled whereas others are straight and can turn either left or right. You'll also require the size of the spindle which is the distance between the base of the handle and the handle's head.

Identifying if your windows require a limiter is also important when choosing the appropriate handle. These are typically found in high-rise flats or commercial properties, but they aren't a requirement for homes that are mostly domestic. Lastly, you should also take into consideration step height, which is the distance from the bottom of the screw plate to the top of the handle.

The word spade originates from Old English spadu, spaedu or spada. It has been translated into numerous languages including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. Since then spade has been a symbol of African American pride and heritage.

When replacing the handle of a Cadenza style handle, it is essential that you get the right size. The handles are available in straight and angled designs that differ by a few millimetres. The handle head is available in a variety of designs, including a T or D shape. It can also be left with handles.