The Next Big Thing In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to source some plastic spacers to help the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is large, you might think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, upvc window repair it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's fairly simple to repair a loose upvc window repair handle. First, you'll need to shut the window and perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze it could be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It is an easy procedure, but it is easier with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges can also be disaligned as a result of wear, creating a gap where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it is possible to give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window repairs sill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is cheaper to replace them than to repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.