17 Reasons Why You Should Beware Of Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the old frame very easily. However If windows with double panes are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this situation you'll need locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional is able to repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the door and the window is large, you might prefer an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the size of the window, window repairs tighten the screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. You'll first need to close the window and then perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you wake up every morning to discover mouldy walls and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, upvc window repair near me window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to replace a hinge on a window, but it's easier if someone helps hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either due to opening the window repair near me in the wrong way or a faulty installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become unbalanced due to wear, which can cause a gap where the sash and frame meet. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them aligned or replaced. In addition, the interlock could also become misaligned. This happens on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some type of filler. They can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as you can.