10 Misconceptions That Your Boss May Have About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum or timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need source some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they are susceptible to a range of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and check for fitting. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

upvc Door repairs near me handles can also become loose. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wears out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It is essentially a very simple process, but it's easier with someone else to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused by opening the window improperly or upvc door repairs Near me due to a poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, creating an opening where the sash meets frame. If they're beyond repair, it may be necessary to get them re-aligned. The interlock may be misaligned. This is located on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.