Repairs To Upvc Windows Isn t As Difficult As You Think

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If you have double glazed window repairs-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from entering the property until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A window that isn't properly aligned can cause problems with light, Double Glazed Window Repairs Near Me draughts or even security. It is crucial to act when you notice your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows to access the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corners of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double glazed window repairs Near me-glazed glass, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with an ease. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do with someone else to help hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to give advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges, also because of wear and tear, may become displaced, which causes gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it is possible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them than to repair them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance immediately.