3 Ways In Which The Replacement Window Handle Influences Your Life

Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to install and feel like good quality. It's crucial to understand that the handle you select for your window replacements must be suitable for the window.

The key factor is the step height which is the distance from the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a variety of replacement window handles made of upvc available to buy. There are numerous styles and colors to choose from, and you're certain to find something that is compatible with your windows. It's easy to buy something on impulse, especially when the handle is damaged. Therefore, it is best to do some research before purchasing an alternative. First, you must know what type of handles made from upvc you have and what the differences are between them. The table below lists the most commonly used handles to help you select the best one to match your window.

The majority of double-glazed windows today have handles that are epag. They are typically attached to the frame with two screws that are screwed in from both above and below.

They have a spindle bar on the back, which can be a variety of sizes. This will determine the way they operate (either left or right handed). This is the reason it's crucial to determine the handle size in order to make sure you're ordering the correct replacement.

The arm is fixed to the frame with two bolts, similar to the Espag handle. However, the handle is curved at a low angle so that it won't poke your blinds. This is a great option for those who want the handle to blend in with your blinds and windows made of upvc.

Cockspur handles look similar to Espag handles, but they have a nose which closes over a wedge that sits on the frame of the window. This kind of handle can be commonly used on older Upvc windows and also on some wooden windows.

Tilt and turn handles are usually found on casement windows and can be operated by turning the handle or pressing on the top of the window. This opens the window from the inside and allows you to clean the outside without having to go out onto a ladder or walk over the fence. These are also an excellent option for those who have limited mobility and enhance security and access to the home.

Tips and tricks

Many people will have to replace their uPVC window handles at some moment. It's important to have some tips and tricks that will make the job easier.

The first step is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it could be necessary for you to replace the lock and Upvc Replacement Window Handles handle. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed the handle, you'll need to change them as well as the handle itself.

Fortunately, the majority of uPVC handles adhere to industry standards and are very similar. This makes replacing them a relatively easy process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. After these screws are removed, you can then take the handle apart.

It's a great idea to keep track of how much the spindle extends from the base of the handle after you take it off it. This will enable you to measure the spindle length for the replacement handle. To do this, determine the length of the square peg sticking out from the bottom of the handle and use that as a reference.

This is particularly crucial for inline uPVC window handles as they are always straight and open from left or right, and will not operate in the middle. It's a good idea if you're not sure of the kind of handle you have at your home, to borrow a handle to see how it works.

Another great tip for working out what the handed of the uPVC window handle is is to look at the way the handle moves when it is operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're unsure then you can always ask someone else to open the window with the handle, and work out how it operates in this way.

Take a measurement of the spindle

It can be difficult to pick the appropriate replacement handle for your window as different handles do not have the same size. The spindle is the part that controls the locking mechanism inside the window and it is important that when fitting a new handle, you measure the spindle length accurately to ensure that it will fit. There are a variety of types of uPVC window handles and they operate in different ways, therefore it is crucial that you know what type of handle you are using and the type of locking system that you are using.

The spindle of the handle extends out from the handle's rear and is attached to the lock gearbox inside the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked with keys to increase security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They have an "nose" that is secured by a wedge-shaped striker block. They are also quite simple to use and can be locked with keys. These handles can be slightly more difficult to locate replacements for because they are not as common as the handles that have a swivel.

If you own a tilt-and-turn uPVC and you require a new handle that has an alternative locking system. It can tilt the window open but also rotate it around to fully open it. It is essential to select a handle with a spindle of at least 55mm to be able reach the window frame.

You can use the same procedure to remove and replace this kind of uPVC handle, however you will need to be careful when unscrewing the old one. You may need to open the window a little larger than usual to ensure that you reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the right position and tighten the screw covers and test to ensure the lock works properly.

Replace the handle with the new one.

Once you have the right handle replacement it is easy to screw into place. This will require a screwdriver and may be easier with an electric one. When screwing in place it is important not to over tighten the screws, as this could cause the handle to crack or warp.

Inserting the spindle is the second important step to attach the new handle. It is the part that runs through the handle and operates the locking mechanism within the window. It is essential that it is fitted correctly, as it will ensure that the window is able to be opened and closed securely.

There are many different types of uPVC handles. They include:

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is useful for windows in difficult-to-access locations.

Tilt and turn handles - These are used on tilt and turn windows to operate the closing and opening mechanisms.

These are the most commonly used and the majority of uPVC windows have these in place. In the UK, they are commonly referred to as "Bay Windows".

It can be frustrating if your uPVC handle fails. There isn't any need to replace the entire uPVC window because of a broken handle. There are a few easy steps you can follow to repair or replace a damaged uPVC handle.

You can fix your broken window handle fast by identifying the type and measuring the spindle. It is crucial to be patient and prioritize security when working with windows and tools, but this is a easy task. It could be the difference between having a secure and secure home or a window that can be easily opened. If you have any concerns or want to talk with a professional regarding replacing the handle on your window, call Bridgewater Glass. We have a team of highly experienced and knowledgeable professionals who are able to assist with any issues you might be experiencing.