The Advanced Guide To Replace Upvc Window Handle

How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't panic. Replacing the upvc handle on the window is a simple task that can be accomplished in a couple of simple steps.

If you have a cranked or inline espagnolette style window handle, all of them come with a square spindle bar that extends from the back plate and is inserted into the locking mechanism.

Determine the type and size of the handle and lock.

Over time, window handles and locks can be damaged or residential lose their functionality. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing to do is identify the kind and size of the lock and handle. This will help you determine the replacement parts you require.

Identifying the kind of handle can be done by looking at the base of the handle. A screw or pin will hold the handle to its base. If the screw is gone it could indicate that the handle is separated from the base. If the handle has been split in the middle and no longer grips onto the spindle, this can also indicate that it needs replacement.

There are many uPVC handles, but the Espag handle is the most common. They are typically fixed using two bolts, and the spindle engages the locking mechanism within the frame of the window. These handles are commonly used on tilt and turn uPVC windows.

Another kind of uPVC window handle is the Cockspur handle. They are similar to Espag handles, but they have smaller projections from the frame. These handles are typically used on older uPVC windows.

Finally, there are also Venetian window handles, which are similar to the Espag handle, but they have a flat base that allows them to be positioned in a flush position with the frame. They are a great option for homeowners looking for an elegant, stylish handle that blends with their uPVC window frames. The handles are also available in a broad selection of colors to fit any style.

Take a measurement of the spindle

Before ordering a new handle, it's crucial to know how the old one is attached. This will determine whether it's too tight or too loose and also if it can fit into the window frame. You can do this by identifying the type of handle you have and measuring the spindle length. The spindle is a steel shaft that connects your handle to the lock on the window frame. The spindle comes in a variety of sizes. The current industry standard is 8mm. Older handles could have a 9mm cross-section so it's crucial to take measurements of the old handle to ensure you get the right size replacement.

There are several types of window handles, but the most popular are inline Espagnolette and cockspur handles. They operate with a locking mechanism inside the window using shootbolt rods which secure the window when it's closed. They are secured by screws or pins depending on the type of handle you've got.

You can find replacement handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes, and can be used to make new or replacement windows. They can also be key-locking or non-locking for additional security.

To take off the handle, simply open the window towards the door and unscrew all screws that hold it in place. Be careful not to damage the screws and put them in a container for future use. After the screws are removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to its end. This will provide you with the information needed to buy the right replacement. The handle's spindle is the shaft of steel that connects it to the lock gearbox inside the window frame.

Remove the old handle

The replacement of the handle of a uPVC handle is a straightforward task that takes less than five minutes if you have the right tools. The first thing you need to do is identify the size and type of the handle or lock. This will allow you to determine the best replacement. Then, you can take measurements of the spindle to determine if the handle is suitable. Then, you'll have to remove the old handle and replace it with the new one.

The majority of uPVC handles are inline Espagnolette handles, which are equipped with an integral spindle that slots into the locking mechanism of the window. They are usually easy to remove, however you may need to use force when they're stuck. The handle is typically held in place by two screws, which you can remove with the help of a screwdriver. Depending on the kind of handle, you may also have to remove any pins holding it in the position.

After removing the screws, you can take off the handle you were using previously. The top of the base plate will be visible once the handle is in the open position, revealing two screws that you can unscrew. There's also an unimportant silver or color sticker that must be removed if it's still in place.

You can now put in the new handle using the screws from the old handle. Align the screw holes on the window with the holes in the handle. Once you've completed this, replace the screw caps. Test the new handle. It's simple to swap a uPVC handle, but you need to do it right.

Fit the new handle

If you've managed to remove the handle that you have on the frame, now is the time to fit your new handle. Begin by locating the screw covers and levering them out using a screwdriver. Once they are removed, put them in a safe location and proceed to the next step.

Next, put the new spindle in the handle by aligning it with the existing hole and screwing it into. The holes on the handle to the holes in the window frame. Use a screw that is the same size as the previous.

The uPVC Espag handle is fitted with a spindle of 7mm square that rotates the lock mechanism of the window. This handle style is used in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with long noses that lock over the frame's outer edge or transom bar cross members and are often found in older windows made of uPVC.

Once the new handle is installed, it is important to test that it works correctly by locking and unlocking the window several times. If everything goes to plan, your replacement uPVC window handle should now be secure and functioning smoothly. If not, the above steps will help you identify any issues and resolve it quickly. If you're having trouble with your uPVC handle or have any other glazed home improvement issues do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace a variety of window handles and frames, making us an excellent option for your double glazing requirements.

Test the new handle

Over time and through normal use the uPVC locks and handles are susceptible to damage and wear and tear. They can become less secure and efficient which is why it's crucial to replace them as quickly as possible. It's also a good option to consider when you upgrade your windows. Change the handle and locking mechanism will ensure your new windows' integrity.

When it is about uPVC window handles, there are a variety of different styles. Some are secured with screws or pins, while others have blades that slide into the lock mechanism. Each type has its own method of replacement, so it is important to know which kind you've got before you begin working on it.

Espag window handles are the most common type, and are usually used on newer uPVC windows. The spindle extends from the handle into the lock gearbox and activates the locking system when you open the window. They are also easy to take off. However, you should be careful not to harm either the mechanism or handle.

Cockspur window replacements handles are another popular option for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the wedge-shaped striker plates on the frame. This type of handle can be more difficult to repair than others, but is nevertheless a great option for homes with a lot of windows.

Venetian window handles are secured with two bolts. They have a slim projection from the frame, in contrast to the Espag handle. These handles are great when you want to have a flush-fitting handle that blends in with uPVC window frames. They're an excellent choice for residential and commercial properties.