Repairs To Upvc Windows: What s No One Is Talking About

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is large, you might think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems such as sagging. A sagging uPVC windows can cause issues with light, draughts and even security. It's important to take action when you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the old caulking may require removal before a new layer is applied. It is crucial to remember that when it is about upvc window repair near me window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze It could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are always happy to provide assistance.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and Window Repairs the frame. If they are damaged beyond repair, it could be required to realign them. The interlock may also become unbalanced. It is located on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace them.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window repairs sill. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come the point when it's more efficient to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.