10 Myths Your Boss Has Regarding Double Glazed Window Repair

Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that stops heat loss in the winter and helps to keep your home cooler in the summer. Double glazing windows fixed when they need to is an excellent method to ensure they are operating properly.

Over time, condensation and misting can impact your double-glazed windows. Double glazed windows can become difficult to open and close.

Broken Panes

A unruly ball, a flying stone from your lawnmower or even an intense storm could shatter the double pane windows of your home which can expose your home to the elements. Even though a glass window that has been damaged isn't easy to fix but it doesn't have to be replaced. In fact the insulated glass between the two panes is still in good shape, and you can fix your double-pane window using a bit of DIY effort.

You'll first need to remove any broken glass from the frame. This will be messy work, and you'll want to be cautious to prevent any glass fragments from falling on the floor or slipping out of the frame. Wear work gloves to protect your hands and use an abrasive cloth around the damaged glass to avoid further cuts or damage. After removing the broken piece take care to clean the entire frame of the window to remove any remaining sealant or debris. It's important to smooth rough areas of the frame to ensure a smooth surface for your new glazing.

After the frame has been cleaned, you can apply a new layer of glass to the seam in which the broken pane was removed. This is the most effective way to ensure your window stays sealed and protected and help you save energy costs by stopping drafts and water from entering the house. The next step is to select your glazing material. There are many options available such as clear tape, which is more durable than regular tape and prevents further cracking of your window, or glazing film, which is similar to clear plastic wrap. This choice has the benefit that it can be painted to match your frame and will also keep out snow and ice.

Whatever material you use it's essential to press the glaziers points into that seam where the putty meets your frame. These will hold the new glass in place and help it stick to the frame. Glazier's points can be found in hardware stores, and they come in pre-made ropes which you roll over the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues. If you encounter this issue, it is best to contact the company that provided the window. Many have warranties and guarantees that cover these issues. Fogging or condensation between the windows' panes is a sign that your seals aren't working properly. Only a professional can fix this problem by replacing both panes.

This process is a little complicated and requires the use of special tools to take off the old pane and 133.6.219.42 install the new one, however it is possible to do this by a professional who will provide the necessary equipment. It is recommended to leave the job to a professional. These tools could be risky.

If you choose to do this yourself, ensure you wear gloves and safety glasses to shield yourself from any broken glass pieces that may fly off during the process. It is also crucial to remove all putty and metal glazing points from the grooves in which the new window will go. It is also recommended to brush the frame with wire and vacuum or wipe it with a damp cloth. After the frame is dry it is time to order another piece of glass that is 1/8" shorter in both directions than your existing window. Make sure the glass fits into the grooves.

Depending on your frames, you will then need to apply the caulk on the grooves to ensure that the new pane is securely in the right place. Once the caulk has dried, you will need to smooth it out and make any necessary adjustments. The wood molding can be reinstalled.

If the weather abruptly changes, double-glazed windows could become difficult to open or close. Extreme temperatures can cause frames to shrink or expand and, as a result, they can slide or become stuck. You can try wiping down the frames with water and then lubricating them when this happens, but it may be better to seek help from the company who installed your windows.

Misunderstood

When moisture gets trapped between the glass panes it can cause misted double glazing. Double glazing is comprised of two panes which are separated by a space that is filled with argon for greater thermal efficiency. This results in an airtight seal that keeps warm indoor air inside and cold outside air out.

Over time however, this seal may break and moisture will begin to accumulate between the window panes, causing them to become misty. This happens because the space between the panes is heated by sun, causing water vapour to develop in it.

This is a normal occurrence, but when it occurs between the window panes it could cause problems as it can no longer regulate the temperature of the room and allow the outside temperature to affect the indoor temperature. Northfield Glass can help you in the event that your double-glazed windows begin to fog.

We can replace a single blown sealed unit, without needing to replace the entire window. This is less disruptive than a complete replacement. Our misty window repair involves removing the glass unit, cleaning it, then replacing it with a new one to create a watertight seal again.

There are companies in the industry which claim to drill holes into your windows with mist and inject chemicals into them which claim to eliminate fog & condensation, however, we do not recommend this method. This method is not only unattractive, but it could cause damage to the toughened glass and leave you with a window that does not fully function.

It is important to fix the issue as soon as possible, as left untreated, it could cause mould growth which can not only damage the window, but also poses health risks for your family members. Moisture can cause other issues in your home, like dampness or rot. In certain cases the window might need to be replaced entirely.

Blown or Failed

Modern double-glazed windows feature two glass panes that have an inert gas or air between them. This improves their thermal efficiency, allowing heat in and cold out. Over time, the gas can become depressurised which can lead to a range of issues.

Condensation in between the panes is one of the most common. While it is a natural event, it doesn't necessarily mean that your window is damaged, it can be a sign that you need to seal your windows. Condensation can also be a sign that your double glazing is damaged in which case it should be replaced completely.

double glazed window repairs-glazed windows may also cause draughts. It could be due to an issue with the seal or a damaged handle lock. A draught is evident and can result in more expensive heating bills Therefore, it is essential to get it fixed sooner rather than later. Check the seals around the window frame by feeling the cold air.

You may also see water beads on the interior of windows when your window seals aren't working. This is an indication that you have to seal your double-glazed windows.

Your window frames are designed to move slightly and this is essential to keep the glass sheets in their place. Over time, this special packaging material can become compacted. This could result in the seal being broken. This will allow the air to move between the panes, decreasing the efficiency of your window's energy consumption.

Double glazing that has blown an air seal is a sign of failure and needs to be repaired as soon as is possible. A damaged seal can stop your double glazing from performing its primary function which is to keep cold air out and warm air in. Furthermore, a blow-off seal will let your home's moisture in, which can cause mold and other unpleasant conditions. Call a double glazing specialist as soon you notice a blowing window seal. They can replace the entire unit.