10 Things Everyone Hates About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may prefer a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time, they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can get at the frame. After that, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose Upvc Window Repair window handle yourself. First, you'll need to close the window and do an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in conditions of dampness and Upvc Window Repair can spread quickly throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed glass, it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in the breeze. They can be repaired by any skilled DIYer and are usually done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause gaps to develop where the sash joins the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become misaligned. This happens on the hinge side and might require to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert immediately.