10 Things That Your Family Taught You About Replace Upvc Window Handle
How to Replace a UPVC Window Handle
Don't be concerned when your upvc handle has become broken. Replacing a window handle made of upvc is an easy task and can be accomplished in a matter of a few steps.
No matter if you are using a cranked or an in-line espagnolette style window handle, they all feature a square spindle that protrudes from the back plate and is slotted into the locking mechanism.
Identify the type and size of the lock and handle
Over time, window handles or locks may be damaged and lose their function. It is possible to repair this issue without having to replace upvc window handle the entire uPVC unit. One of the first things you need to do is determine the type of handle and lock you have because this will help determine the replacement parts you will need.
Identifying the type of handle can be identified by looking at the handle's base. There will be an anchoring screw or pin that holds the handle to its base. If the screw is gone, Replace Upvc Window Handle it could be a sign the handle has separated from the base section. If the handle has split internally and isn't able to hold the spindle any longer, it may also be a sign that the handle must be replaced.
There are many different types of uPVC window handles The most well-known is the Espag handle. They are usually secured with two bolts, and the spindle engages the locking mechanism within the frame of the window. These handles are used on uPVC tilt and turn windows.
Another kind of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, Replace Upvc Window Handle however they have a lower projection from the frame. These handles are generally used on older uPVC windows.
There are also Venetian sash window replacement handles, which are similar to the Espag handle but they have an elongated base that allows them to be placed flush with the frame. These are a great choice for homeowners who want a stylish, elegant handle that blends with their uPVC window frames. These handles are also available in a wide variety of colors to match any decor.
Measure the spindle
Before ordering a new handle, it's crucial to understand how the original handle is attached. This will tell you whether it's too tight or too loose and also if it can fit inside the window frame. You can do this by identifying the type of handle you own and measuring the spindle length. The spindle is a metal shaft that connects your handle to the lock in the window frame. The spindle comes in various sizes. The current standard for the industry is 8mm. Older handles might have a cross-section of 9mm so you'll need to measure your old handle to ensure you get the correct size replacement.
There are many kinds of window handles. However, the most commonly used are inline Espagnolette and Cockspur handles. They operate with a locking mechanism inside the window using shootbolt rods that lock the window when it's closed. Depending on the type of handle they are secured in place with pins or screws.
You can purchase replacement upvc handles on the internet or in many DIY stores. They come in a range of finishes and are suitable for new or replacement windows. For extra security, they can be either key-locking or a non-locking fire escape.
To take off your old handle simply open the window and unscrew the screws that secure it. Place the screws in a container to prevent damage. After the screws are removed, remove them carefully from the handle. Take a measurement of the distance from the base of the spindle up to the tip. This will provide you with the information necessary to purchase the correct replacement. The spindle of the handle is the steel shaft connecting it to the gearbox that locks the window frame.
Remove the handle that was previously used
Changing a uPVC handle is a simple job that takes less than five minutes if you've got the proper tools. The first thing to do is determine the size and type of the handle or lock. This will allow you to select the appropriate replacement. You can then measure the spindle to make sure that the handle will fit. The handle that was used previously needs to be removed and replaced with the new.
Most uPVC handles are inline Espagnolette handles, with an integral spindle that slots into the window's locking mechanism. These are generally easy to remove, but you may need to use force to remove them if they are stuck. There are usually two screws that hold the handle in place, which can be removed using either pliers or a screwdriver. There may be a need to remove pins, depending on the type of handle.
After removing the screws you can take off the handle you were using previously. When the handle is opened the top of the baseplate should be visible. This will reveal two additional screws that can be unscrewed. There's also an unimportant silver or colour sticker that has to be removed if it's still in place.
Using the screws from the handle, you are now able to screw the new handle into place. Make sure the handle is in the unlocked or open position, then align the screw holes with those on the window. After you've done this you can put on the caps on the screws and then test the new handle to confirm that it works properly. Changes to a window made of uPVC can be a simple and quick task, but it's crucial to ensure you complete it in a proper manner.
Fit the new handle
If you've managed to successfully remove the handle that you have on the frame, it's time to put in your new one. Begin by locating the screw covers and levering them out using your screwdriver. After the screws are removed, place them in a safe place before proceeding to the next step.
Then, screw the spindle in by aligning it with the hole. Make sure that you align the holes of the handle with those in the window frame. Also, use a screw identical to those used previously or it could result in the handle not being secure.
uPVC Espag handles are fitted with a 7mm square spindle that rotates the lock mechanism fitted to the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) have a long nose that locks over the outer frame or transom bar cross member and are typically found in older uPVC windows.
It is important to lock and unlock the window a few times after the handle is installed. If everything goes according to plan, the new uPVC handle should be securely attached and working smoothly. If not, the above steps will help you diagnose any problems and get it fixed quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or any other glazed home improvements. Our glaziers are certified to repair or replace various window handles and frames making us a good option for your double glazing requirements.
Test the new handle
As time passes and through regular use the uPVC locks and handles may be damaged and wear and tear. This can leave them less secure and efficient which is why it's crucial to replace them as quickly as possible. It's also recommended to do this after you upgrade your windows, because changing your handle and lock will ensure the security of your new windows.
There are many different styles of uPVC window handles. Some are attached with screws or pins while others have blades which slide into the lock mechanism. Each type has its own method of replacement, so it's important to know what type you have before working on it.
The most well-known kind of window handle is the espag. They're usually found on the latest uPVC Windows. The spindle extends from the handle into the lock gearbox, and it activates the locking mechanism when you open the window. They're also simple to remove however you should be careful not to harm the mechanism or the handle while taking them off.
Cockspur handles are another alternative to uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates in the shape of wedges on the frame. This kind of handle is more difficult to fix than other kinds however it's an ideal choice for many homes.
Venetian handles are connected to the frame by two bolts and they have a low projection on the frame. This differs from the Espag handle. They are ideal if you need an flush handle that blends with your uPVC windows. These are a great option for commercial and residential properties.
