A Productive Rant Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to rust or Window repairs rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled.

It's a great idea tape the gap once the glass is removed. This will keep water and drafts from entering your property until a professional is able to repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the door and the window is large, you might want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows so you can get at the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for fitting. If you are happy with the fit of your window repairs, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The corner joints of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to take action if awake each day to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the problem the old caulking may need to be removed before a new layer can be applied. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazing repairs glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler if you have someone to help you hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, causing an opening between the frame and sash. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace them.

The next common cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.