The Next Big Thing In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or Upvc Window repairs duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap between the door and the window repairs is substantial, you may prefer a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window repairs near me is difficult to open or if it blows open with the breeze. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is an easy process, but it's easier to do when you have a person to help you hold the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are always happy to offer suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is crucial to recognise that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.