The Three Greatest Moments In Replacement Upvc Window Handles History

Replacement Upvc Window Handles

Almost all replacement window handles made of upvc come with everything you need, however if the previous handle was fitted with screws or pins holding it, these are required to be removed. Then, you need to remove the snap-in cover at the base of the handle.

The next step is to determine the type of window lock and handle you are replacing. This is vital!

Espag

Espag handles are a set of multipoint locks that are fitted to casement window types like uPVC or wooden double glazing. The handle has a 7mm square shaft that fits inside a gearbox on the uPVC window. When the handle is turned, it triggers a series of locks around the window's perimeter. Espag handles are also referred to as shootbolt handles and provide more security than the standard single point lock that is found on older frames.

They are available in a range of different options such as inline and cranked designs that can be used for either left or right hand operation. You can even find various sleek ergonomically designed handles that are designed to enhance the feel of the handle and how it appears on your windows.

If you're planning to replace your current uPVC window handle with an espag handle, you'll be required to determine the dimensions of the spindle installed and measure it from the base of the handle to ensure you purchase the correct replacement. This measurement, known as the step height will assist you in selecting the perfect uPVC window handle for your home.

If you need to remove screws that secure the handle, use a screwdriver or pliers. After removing the pins or screws that hold the spindle together then you can remove the handle.

Once the handle is removed, you will then be able to access the locking mechanism inside the frame of the window and remove the cockspur wedge block that is attached to the handle, allowing the window to open. The new uPVC window handles that you've purchased will now be able to fit on the cockspur wedge block and then into the spindle of the handle and allow the broken window replacement to be opened again. If you'd like to make sure that your uPVC handles are securely secured and secure, you should replace the cockspur block a brand new one.

Cockspur

Cockspur handles are typically found on older uPVC and aluminium windows. The handle is closed and rotates into a wedge-shaped plastic catch. (Not to be confused with timber latches, which are also covered in this section.) The handles are available in lockable and nonlockable versions. They are available in various nose heights that can be adjusted to the frame.

The handle locks with an slender spur (little triangle bit) pulling against a wedge made of plastic that is fixed to the frame. They are usually one-way handles however a deadlock lock cylinder that locks can be added for extra security.

The Replacement window near me cockspur handles are also simple to install. All you require is the correct backset as well as a new set (supplied). The backset is measured from the baseplate to the nose on the underside of the handle. Aluminium window frames are usually 9mm wide, while UPVC is 21mm wide. There are a variety of other options though so it is important to measure the handle prior to purchasing the handle (see video below for how).

The spindle or, in certain cases the entire handle is removed by unwinding the handle. The replacement handle can then be screwed into place with a pair of pozidriv screws. The pozidriv screws can be purchased in either a brass or zinc finish to match the existing hardware and there is also the option of a locking version that self-locks.

This is a simple to install replacement for the cockspur handle that is perfect for fixing or replacing old uPVC windows. They feature an universal design that makes them suitable for most profiles and backsets. Each handle comes with three packers, each of a different thickness. They are installed on the underside of the handle noses and can be stacked to create backsets as small as 9mm or as big as 21mm. These handles are available in both left and right-handed versions and in lockable and nonlockable versions. They also come with a variety of nose heights.

Tilt and Turn

Tilt and turn windows are a premium European window style that has been in use for a long time in Europe but is just starting to catch on stateside. The windows combine the functionality of three different window styles: tilt, in-swing, and pivot. They are great for older homes since they offer more airflow than standard windows.

When tilt and turn windows are closed, they will lock as any other fixed window. However, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened inward and the window can be tilted in order to allow air circulation through the opening at the top of the frame. This is a great solution to let air circulate without the need to open a large window which could pose a security risk if not properly secured when opening.

The sash is also able to be fully opened by turning the handle 90@ or 180@. This allows for full air circulation, which is particularly useful in rooms that are chilly or houses where odors from smoke or other sources are likely to accumulate. It also makes cleaning the outside of the glass much simpler because it can be done inside the home - a job that usually requires ladders that are a bit shaky.

Tilt and turn windows are also extremely secure. When they are locked in the closed position, they are difficult to open from the outside and they feature double seals that prevent rainwater from entering the house when in the tilted or in-swing position. This feature is particularly useful for older homes where burglars tend to target windows that can be opened by the side hinges.

Spade

There are several different types of handles that are able to be fitted on upvc double-glazed windows. The two main types are Espag handles and Cockspur handles, then there's also tilt and turn handles, spade or blade handles, and monkey tail handle. The type of handle that you select will depend on your preferences and the type of windows you have.

To choose the appropriate replacement for your upvc window handle, you have to know how the existing handle is attached to the frame. This is known as handing and is a vital piece of information, especially when buying online as some handle variations don't fit all windows. For example, some handles are angled whilst others are straight and will turn left or right. It is also important to be aware of what the spindle length is and the distance from the base of the handle to the tip of the handle.

Identifying if your windows require a limiter is also essential when choosing the right handle. These are usually used in high-rise flats or commercial buildings, however they're not a requirement for most domestic homes. Lastly, you should also consider step height which is the distance from the top of the screw plate to the top of the handle.

Spade comes from Old English spadu, spaedu or spada and has been translated into many languages including German spaten and Low German spathen. In the Harlem Renaissance of the 1920s in New York City the word spade was used to mock black people. Spade has since risen to prominence in pop culture and is a widely recognized symbol of African American heritage and pride.

When replacing a Cadenza handle, it's crucial that you choose the right size. The handles are available in both straight and angled designs that differ by just a few millimetres. The handle head can change between a D and T shape, or be without handles at all.