Don t Buy Into These "Trends" Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed and upvc window repairs the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to reach the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you're happy with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. Most often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed window repairs glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges will wear out over time. It is very easy to change a window hinge but it's much simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to offer suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, creating a gap between the frame and sash. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc window repairs near me will remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert immediately.