Don t Believe In These "Trends" Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap between the door and the window is substantial, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in position.

If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix a loose upvc window repair window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and wet floors. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for UPVC Window Repairs leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

It is a fairly easy fix that can be done by any competent DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change a window hinge but it's much simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges may also become disaligned as a result of wear, which can cause a gap where the sash meets frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it is feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair windows made of upvc window repair will provide an excellent level of insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional immediately.