15 Up-And-Coming Window Repair Bloggers You Need To Follow

Window Repairs

Window repairs can help homeowners save money and make their homes warm. Window replacements may be required in the event of serious damage, such as broken glass or a shattered window frame.

But many other issues can be fixed to prolong the lifespan of your windows. Common issues include:

Cracked or Broken Panes

Glass that is cracked could be caused by a lawnmowers who throws rocks at the wrong time or a tree branch being blown by strong winds. This not only looks bad, but it can result in higher energy bills as the broken pieces allow cold air in to your home. Fortunately, it's generally easy to fix windows with damaged panes.

Begin by carefully removing the glass using gloves and glasses. You may have use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is water-proof to the frame's edges. This will stop water from getting in through the crack, which can cause further damage to both the frame and the glass.

If you have double-pane glass, cracks that are severe could damage the gas layer between the panes, making your windows less insulative. If the crack is significant enough to cause damage to the integrity of the glass or in the case of an inner pane that's totally missing, it might be time to contact an expert.

Cracks in thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If this happens across two windows it's recommended to replace the window rather than trying to upvc repair it.

For cracked windows that aren't yet ready to be replaced clear tape can do a decent job of preventing the crack from spreading and preventing the entry of bugs and cold air. You can cut an area of nylon stocking or tarp that's large enough to cover the crack and fix it with duct tape. This is not an indefinite fix, but it will keep insects and cold air away from your home. If you notice cracks or blemishes on the windows of your old ones it is recommended to contact your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a frequent problem for windows. It can ruin the appearance of a home and also pose danger to your safety. However, it is possible to fix rotted wood. First, you need to ensure that the cause of the rot has been taken care of. This can be accomplished by examining for leaks in the roof and gutters that aren't functioning or cracked caulking, as well as other areas which allow water to penetrate the wood.

Next, you will need to take out any rotten parts of the window replacement frame. This can be accomplished with the claw hammer, chisel or a rasp. After removing the rotten wood, you'll have to replace it with new wood. Pre-treated wood is suggested for this task, since it will resist decay. If you are unable replace the rotted wood then you can use filler or wood hardener to repair the damaged area. Many hardware stores will have this type of product. Follow the directions on the label of the product to ensure the most efficient results.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant to the wood. Sikkens, for example is a great one to apply.

Use a two-part epoxy to protect the wood against further damage. This product is easy-to-apply and leaves a nice finish. However, it's important that you follow the application instructions on the label. After the epoxy filler is dry, you can sand the surface of the wood. Start with a rough sandpaper then move to more smoother grades.

You do not want to expose the damaged area to more moisture. Therefore, it is a good idea to cover the repaired area with an oil-based primer which will protect it from moisture. Then, you can reapply waterproof wood sealant.

The website won't work

A window that won't open can be the result of many factors. The house could have settled or the wooden frames may have warped in rainy weather. Someone might have also nailed them shut for fix security. But with some patience and the right tools, all windows that are locked can be opened.

The accumulation of gunk or debris can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges and locks. Additionally, hardware made of metal is prone to rust when it comes into contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent the oxidation process and ensure that your window is functioning correctly.

The pulleys used to raise or lower the window may become loose, or even break. These components can lose their tension and become obstructed especially when the window is two or more stories above the ground.

If you are having trouble opening a window try using a pry bar to gently force the window to open a bit at a time. Place a block of wood on the frame to give the pry bar more leverage. Also, be sure not to harm the window or wood. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood, making it easier to move.

Another common issue for windows that aren't opening is a broken spring that prevents the window jamb from rising or lowering. Based on the manufacturer of your windows, you'll be required to refer to your owner's manual for further instructions.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still not opening It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slide from functional to useless, as windows that aren't properly shut could expose your home to burglary and water damage. Contact our team today for more information on our replacement windows and services!