10 Sites To Help You Be A Pro In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double glazing repair-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need find some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you are going attempt to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the window and the door is large, you might need to consider a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and UPVC Window Repairs long-lasting alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism wears out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and floors that are wet. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal than the frame. It is also possible to be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it blows open with a breeze. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is an easy procedure, but it is easier to do if you have someone to help hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop between the sash and the frame. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be disaligned. It is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace these.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as possible.