15 Lessons Your Boss Wished You Knew About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they can be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the window and UPVC window repairs the door is substantial, you may want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window repair. As time passes, they may develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need to open the window to get to the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The corners of the sash must be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it blows open with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash meets the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, Upvc Window Repairs can also become misaligned, again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be placed on the windowsill on top. They can help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.