Repairs To Upvc Windows: It s Not As Difficult As You Think

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is large, you might prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, Window Repairs using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, Window Repairs which causes them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close your window and do an experiment fit. The corners of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or due to inadequate installation at the factory. Sending us photos via our website will often solve the issue. We are happy to provide assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the chance of windows sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges may also become unbalanced due to wear, creating an opening where the sash and frame meet. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The interlock may be misaligned. This is located on the hinge side and could require to be cleaned. In some instances it might be necessary to replace them.

The second most frequent reason for draughts is window repair near me seals, these can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.