Its History Of Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that help the new pane to fit perfectly into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. If this happens, UPVC Window Repairs it's essential to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need close your window and do an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and upvc window repairs reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

Check that the upvc window repair hinges open and close in the correct direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear could become misaligned. This causes a gap to form where the sash joins the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may also become disaligned. This is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be placed on the windowsill on top. They can help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than fix them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance immediately.