10 Wrong Answers To Common Repairs To Upvc Windows Questions: Do You Know The Right Answers

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, UPVC Window Repairs and they generally fit into frames that were previously in use very easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass is removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose upvc window repair handle. The first step is to close your window and do an experiment to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to discover mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you suggestions.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be possible to give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. If you encounter any issues with your window made of upvc you should consult a professional as soon as you can.