15 Funny People Who Are Secretly Working In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for window repair modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However, if windows with double panes are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows to get at the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fit. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose upvc window repair near me handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy procedure, but it is simpler if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window a certain way or by improper installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the Window Repair open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, causing gaps where the sash and frame meet. If they're beyond repair, it could be necessary to get them re-aligned. The interlock may also become misaligned. It is located on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace these.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.