Repairs To Upvc Windows: What s The Only Thing Nobody Is Talking About

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The corners of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be repaired by a upvc window repairs near me window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with the breeze. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is an easy process but it can be simpler if you have someone to assist in holding the frame up.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to give suggestions.

It is also essential to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and Upvc window repairs decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window, can be misaligned. Again, it may be possible to just give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as possible.