10 Things Everyone Hates About Repairs To Upvc Windows Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. However when you have double-pane windows that are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this case you'll need find some plastic spacers that assist the new pane to fit perfectly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might be interested in the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window repair watertight and draughtproof.

uPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy process, but it's easier when you have a person to help hold the frame in place.

Verify that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to provide assistance.

It is also essential to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become misaligned due to wear, which can cause gaps where the sash and frame meet. If they are damaged beyond repair, it might be necessary to get them re-aligned. Second, the interlock can be misaligned. It is located on the hinge's side and might require to be cleaned. In certain instances it is possible to replace the hinges.

The next most common reason for draughts is window seals. These can become worn down or damaged over time and uPVC window repairs will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

Lastly, one of the most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognise that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. So, if you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.