20 Trailblazers Lead The Way In Fiat 500 Replacement Key Fob

Add a Sparkle to Your Fiat 500 Key Fob

Add a little fun to your Fiat 500 Key Fob with these cute silicone covers. They're easy to put on and snap in place of your original black cover.

The silicone covers protect your keys from splashes and dust. They also make your key appear more stylish. The remote control's signals are not affected and they continue to function even when the cover is not in place.

Guard your key from splashes, dust and other contaminants.

This silicone cover will give a classy look to your key. It fits perfectly around your key fob without loosing. It also shields your keys from splashes and dust. The silicone cover will not alter the signals transmitted by your key remote. Therefore, you can still use your key fob's buttons just as you would normally.

Accessorize your fiat ducato key 500 with these funky covers in Grey and Black. These covers are perfect if your original cover is looking a bit worn, scratched or damaged. The covers are made from high-quality silicone and come with two key rings, so you can switch them out whenever you are bored with one color.

These covers replace the stock, fiat 500 car Key replacement black key cover on your vehicle. These covers will not fit if you have the original key cover installed.

Great look!

Fiat is an exclusive and well-known Italian brand and their cars sport an incredible style which makes them stand out from the rest of the pack. These sparkly key covers are a great and easy method to add a dash of elegance to your car keys without being overbearing. They look stunning on your key fob, and can truly refresh the look of a worn-out key.

They are designed to replace the original black cover and they snap into place quickly. It is a good idea to remove the old cover prior to installing the new.

The Fiat 500 Car Key Replacement logo is printed in both Grey and Black. So if you decide to change your preference, you are able to switch it up! These are also great presents for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great method to make your keys more modern. They come in a variety of styles and colors so you can find the perfect style to match your personal style. Install them yourself in ten minutes. You'll need a screwdriver as well as some patience. The first step is to take off the cover that was originally installed. The original cover needs to be removed prior to the replacement cover can be put in place.

After removing the old cover Use a flathead screwdriver in order to pry out the four major attachment clips located on the side that is on the passenger side of the fob assembly. These are marked in red on the photo below. Note the yellow locating tabs, which must be deactivated.

After removing the battery, replace it with a new CR2032 3 Volt coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening on the fob, and that the"-" negative side is facing towards the buttons made of rubber.

Reattach the passenger-side mirror cover by aligning the locating tabs. Once you have completed this, insert the fob on the driver's side in your car and test it by pressing the push button on the front of the car key. If everything is functioning properly your car should start to turn on the parking lights, and the doors will lock automatically.

Easy to remove

Fiat 500 Key Covers are a delightful method to refresh your key fob. They're easy to set up and have a distinctive appearance. They guard your key fob against smudges, scratches and dirt. However, before you are able to install a new cover for your key you must take off the original cover from your vehicle.

This is done by pressing the red "Fiat" button located on the front of your key fob. After pressing the button you will release a lever that allows you slide out the metal ignition switch (1). After you remove the metal keys you will discover a small silver switch that features images of a padlock locked and unlocked beside it. This is the key fob battery switch. The battery is simple to replace by turning the switch for a quarter turn using a tiny screwdriver with a flat head.

The key fob has the microchip that connects to the Body Control Module. When you insert your fiat punto locked keys in car key it presses a button in the ignition switch that is used to remind you of the "key-inignition". The BCM will then read the transponder that is on the key fob to confirm that it's valid.

You can also add a design twin pack to your key covers to give it a an original and fun look. These covers snap in place over your original cover and are available in Cream and Silver. The key cover will only work if you remove the black cover from your key fob.