Don t Buy Into These "Trends" Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that help the new pane to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is large, you might want to use security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of your window, tighten the screws to secure them in place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or uPVC window repairs is missing.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window repair.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window, but it's easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. First, the hinges because of wear and tear, may become displaced, which will cause a gap to form where the sash meets the frame. This can be easily repaired by giving them a good clean, but when they're beyond repair, it might be necessary to get them aligned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge's side and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert as soon as possible.