Repairs To Upvc Windows The Process Isn t As Hard As You Think

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, window repair making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the window and the door is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is more related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze, it may be hinges at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. It's easy to change a window hinge but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a Window repair sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they're beyond repair, it may be required to realign them. The interlock may be misaligned. It is located on the hinge side and might require to be cleaned. In some instances it is possible to replace the hinges.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is essential to remember that all windows eventually wear out and it could be more cost-effective to replace them rather than repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.