Window Repair Explained In Fewer Than 140 Characters

Window Repairs

Window repairs can help homeowners save money and make their homes warm. In the event of serious damages such as broken glass or a cracked frame, a replacement window may be required.

However, many other issues can be fixed to prolong the lifespan of your windows. Some common issues include:

Cracked or broken panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch blown by high winds, cracked window glass is not only unattractive but can lead to more expensive electricity bills because the broken pieces let cold air to enter your home. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing glass using gloves and Window Repairs sunglasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Next, use a soft cloth or paper towel to wipe the surface of both the glass and the wood of the frame.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's perimeter. This helps prevent water from getting in through the crack, which could cause further damage to the frame and the glass.

A crack that is severe in double-paned glass could compromise the gas between the panes, which can make your windows less insulative. If the crack is significant enough to compromise the integrity of the glass or the glass has an inner pane that's completely missing, it might be time to contact an expert.

Thermal stress cracks can also happen when there's a dramatic difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If the cracks are situated on two sides of a window it is recommended to replace it instead of try to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready for replacement. It also keeps out cold winds and bugs. You can even cut an area of nylon stocking or tarp that's large enough to cover the crack and fix it with duct tape. It's not a solution that will last forever, but it works well in the event of a crisis and keeps cold air and insects from entering your home. If your windows are older and you're beginning to see cracks in the glass, it's a good idea to check with your local window company regarding whether replacing the entire window would be a better solution for you.

Rotten Wood

Wood rot is a common problem with windows. It can damage a home's appearance and pose a safety danger. However, it is possible to repair wood that has rot. First, you will need to ensure that the source of the rot has been taken care of. Examine for leaks in the roof and other places that water may get into the wood.

You'll then have to remove the rotten parts of the window frame. This can be accomplished with a claw hammer, chisel or a rasp. Once the rotten areas have been removed it is time to replace them with fresh wood. It is recommended to choose treated wood for this project since it will be resistant to rot. If you are unable to replace the rotted timber you can apply wood filler and hardener to repair the damaged area. This type of product will be found in a lot of hardware stores. Follow the directions on the label of the product to get the best results.

After you have repaired the damaged areas of the upvc window repair sill, it's important that you protect the area. Apply a water-resistant sealant on the wood. Sikkens, for example, is a great product to apply.

Use a two-part epoxy in order to safeguard the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is essential to follow the directions on the label. Once the epoxy filler is dry, you can smooth the wood's surface. Start with a rough sandpaper then move on to an easier grade.

You don't want to expose the damaged area to more moisture. It is a good idea, that's why you should protect the surface you have repaired with an oil-based prime that will protect it from water. Then, you can reapply waterproof wood sealant.

The W won't let you open

There are a variety of reasons windows won't open. The house may have settled or the wooden frames could have warped during wet weather. There is also the possibility that someone secured them with a nail for security. However, with a little patience and the right tools, many windows that are stuck can be opened.

One of the most frequent causes of windows that isn't able to open is the accumulation of gunk or debris on its moving parts. Grime and dirt build up on the sliding tracks, hinges, and locks over time, says Acme Glass. In addition, metal hardware can get rusty when in contact with humidity or direct sunlight. Spraying grease on these areas will help to prevent oxidation and help keep your windows operating properly.

The pulleys used to raise or lower the window may become loose, or break. The components may lose tension and become obstructed when they are situated higher than two floors above surface.

If you're having trouble opening a window Try using a pry bar to gently push the window to open just a little at each time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

Another common issue with windows that won't open is a defective spring that keeps the window jamb from lowering or rising. Depending on who manufactured your windows, you will have to consult the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they still aren't opening, it's time to replace the windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let windows in your home become functional to useless. If a window isn't properly closed could expose your home to water damage and burglary. Contact our team today for more information on our replacement windows and our services!