You ll Never Guess This Replacement Window Handle s Tricks

Choosing uPVC Replacement Window Handles

Nearly all customers agree that the upvc replacement glass for window window handles are easy to install and feel like good quality. However, it's important to know that the type of handle you pick should be appropriate for your window.

The primary factor is the step height that refers to the space between the nose of the handle to the base or frame. Other considerations include locking mechanisms and designs.

Replacement parts

There are a wide range of replacement upvc window handles available to buy. They are available in a variety of styles and colors so there is sure to be something that will fit your windows. It's easy to buy something on impulse particularly when the handle breaks. Therefore, it is best to look over a few aspects before purchasing an alternative. The first thing you should consider is the type of upvc handle you currently have and what the difference between kinds is. The table below lists the most popular handles so that you can find the right one to fit your upvc window.

Most double-glazed windows today come with handles for epag. They are typically attached to the frame with two screws that screw into the frame from both sides, above and below.

The spindle bar on the back may be of different sizes, and will determine if they are left-handed or right-handed. This is why it's important to take a measurement of the handle you have in order to make sure you're getting the right replacement.

Usually, they are fixed with two bolts much like the Espag handle but they have a lower projection from the frame, which means that the arm will not penetrate your blinds. This is a great option if you have blinds on your upvc windows and want to make sure the handle blends with them.

Cockspur handles look similar to Espag handles, however they have a nose which closes over a wedge which rests on the frame of the window. This kind of handle can be found on a few older wooden and upvc windows.

Tilt and turn handles are usually found on casement windows and can be operated either by turning the handle or pressing on the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They are also a great option for those with limited mobility. They can be an excellent way to increase security and accessibility within the home.

Hints and tips

A lot of people will need to replace their uPVC window handles at some time. It is important to know a few tips and tricks that can help you make the task easier.

The first thing to do is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it could be necessary to replace the handle and lock. If the roller cams or shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Thankfully, most uPVC handles are very similar and adhere to industry standard sizing, which makes replacing them a easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. After these screws are removed, you are able to take the handle apart.

It's a good idea to take note of how far the spindle protrudes from the base of the handle after you take it off it. This will allow you to measure the spindle length for an alternative handle. To do this, take a measurement of the square peg that sticks out from the top of the handle, and use this as a guide.

This is particularly important for inline uPVC handles for windows, since they are always straight and only open to the left or right. They won't work in the middle. If you're not sure of the kind of handle you have in your home, it could be beneficial to get an existing handle from your neighbour's home and observe the way it works to get an idea.

You can also determine the hands of a uPVC window by watching how the handle rotates when it is used. Handles can be turned either clockwise or counter-clockwise. If you're not sure, you can always have someone else open the window with the handle, and figure out how it works in that way.

Take a measurement of the spindle

Selecting the right replacement handle for your windows can be a bit difficult since there aren't all handles that are identical in size. It is crucial to accurately measure the spindle when fitting the new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles that operate in different ways so it is vital to know the type of handle you have as well as the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, it will turn the lock inside the gearbox and opens the window. They are usually utilized on uPVC casement windows and they can be locked using keys to give extra security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They are characterized by an "nose" that closes over a wedge shaped striker block. They are also easy to use and can be locked with keys. It is more difficult to replace these handles as they are not as popular as the espagnolette handles.

If you have an open tilt and turn uPVC window, you'll need to get a special kind of uPVC replacement handle with an entirely different locking mechanism. The handle will tilt the window, and allow it to be turned around to fully open it. You should select an opening handle that has a spindle that is at least 55mm in order to be able to reach the window frame.

You can use the same procedure to take off and replace this kind of uPVC handle, however you will need to be cautious when you remove the old one. You may have to open the window a bit wider than usual to ensure that you get to both screws fixing it to the frame. Once you have fitted your new uPVC handle and ensured that it is in the correct position, then you can tighten the screw covers and test the lock to make sure it works properly.

Install the new handle

When you have the proper handle replacement Window handle it is easy to screw into the right place. It will require a screwdriver, and an electric one could be a lot easier. It is important to not overtighten the screws while screwing them into. This can cause the handle or knob to warp.

Inserting the spindle is a second crucial step to install the new handle. The spindle is the part which runs through the handle to operate the locking mechanism in the window screen replacement. It is vital that it is installed correctly since this will ensure the window is able to be opened and closed securely.

There are many different types of uPVC handles. They include:

Espagnolette Handles - these are handles that are inline and can be used on windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that is ideal for windows that are difficult to reach.

Tilt and turn handles - These are used to operate the opening and closing mechanisms on tilt and turn. They also move windows.

The majority of uPVC window frames come with these. They are often called 'Bay Windows' in the UK.

If your uPVC window handle is broken it can be very frustrating. There isn't any need to replace the entire uPVC windows because of a broken handle. There are many easy steps that can be taken to fix and replace a broken uPVC window handle.

Fixing your broken window handle swiftly by identifying the type and measuring the spindle. It is crucial to take your time and prioritise security when working with windows and tools, however, this is a straightforward task. It could be the difference between having a secure and secure home, or a window that can be easily opened. If you have any concerns or would like to speak with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a team of highly experienced and knowledgeable professionals who can assist with any issues you might be experiencing.