Repairs To Upvc Windows Isn t As Difficult As You Think

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However, if windows with double glazed window repairs panes are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. Over time, they can develop a number of problems, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window repairs near me that is loose yourself. First, you'll need to shut the window and do an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the old caulking might need to be removed before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash joins the frame. If they are beyond repair, it could be required to realign them. In addition, the interlock could also become unbalanced. This is located on the hinge side and might require to be cleaned. In some instances it might be necessary to replace them.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come a point where it is more economical to replace them than repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional immediately.