10 Inspirational Graphics About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double glazed window repairs-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this situation you'll need source some plastic spacers that help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is significant, you may want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and decrease its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be the hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is simpler if you have someone to help you hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to give suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to get them aligned or replaced. The interlock may be misaligned. This happens on the hinge side and might require to be cleaned. In some instances it might be necessary to replace these.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them rather than repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as possible.