Don t Buy Into These "Trends" About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. However If windows with double panes are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this instance, you will need to locate some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window repair. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is simpler with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or Window Repairs due to a poor installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

It is also important to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it's possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to realize that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than fix them. If you encounter any issues with your Upvc window it is recommended to speak with a professional immediately.