10 Things We Love About Window Repair

Window Repairs

Window repairs can save homeowners money and make their homes warm. In the event of severe damage, such as broken glass or a damaged frame, window replacement may be necessary.

Other issues can be fixed to extend the longevity of windows. The most frequent issues are:

Cracked or Broken Panes

Glass that is cracked could be caused by a lawnmower that throws rocks in the wrong direction or a tree branch being blown by strong winds. This is not only visually terrible, but it could result in higher energy bills as the broken pieces allow cold air into your house. It's relatively easy to repair windows with broken panes.

Begin by carefully removing glass using gloves and glasses. You may need to use a utility knife to remove any remaining putty or old glazing compound that has accumulated around the edges of the frame. Next, wipe down the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned and dry, apply a waterproof silicone caulking around the frame's perimeter. This will stop water from getting in through the crack, which can cause further damage to both the frame and the glass.

If you have double-paned glass, cracks that are severe could damage the gas layer that lies between the panes and make your windows less insulative. If the crack is so severe that it compromises the strength of the window, or if the pane inside is not there, you may need to call a professional.

Cracks in the glass caused by thermal stress may occur when there is a drastic difference in temperature both inside and outside your home. The glass is then able to expand and contract. If this happens on two portions of a window, it's probably best to replace the glass instead of attempting to repair it.

For windows that have cracked but aren't quite ready to be replaced clear tape can do a decent job of preventing the crack from spreading and preventing bugs from entering cold air. You can even cut an area of nylon stocking or tarp sufficient to cover the crack, and fix it with duct tape. It's not a solution that will last forever, but it works well in the event of a crisis and keeps cold air and insects away from your home. If you notice cracks on the windows of your old ones, you should check with your local company to see if replacing the whole window is a better solution.

Rotten Wood

Wood rot is among the most common problems with windows. It can ruin a house's appearance and pose a safety danger. It is possible to fix damaged wood. You will first need to identify the cause of the wood decay. Look for leaks on the roof and other places that water may get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done using a claw hammer, chisel or a rasp. After the rotten areas have been eliminated, you will need to replace them with new wood. It is recommended that you choose treated wood for this project as it will be resistant to rot. If you cannot replace the timber that has rotted then you can use wood filler and hardener to reinforce the damaged area. This kind of product will be available at most hardware stores. To achieve the best results, follow the directions on the label.

After you have repaired the rotten areas of the windowsill, it is crucial to safeguard the newly repaired area. Apply a water-resistant sealant to the wood. Sikkens, for example, is a great product to use.

It is also possible to use a two-part epoxy filler to shield the wood from further damage. It is easy to apply and leaves a nice finish. However, it's important to adhere to the instructions for application on the label. After the epoxy filler has dried, you are able to sand the wood's surface. It is best to begin with a rough piece of sandpaper before moving to a smoother one.

You do not want to expose the damaged area to more moisture. So, it's a good idea to cover the repaired area with an oil-based primer which will shield it from moisture. Then, you can reapply waterproof wood sealant.

The website won't work

A window that won't open could be due to various reasons. The house might have shifted or the wooden frames could have warped during wet weather. Somebody may have nailed them shut for Window Repairs security. However, with a bit of patience and the right tools, many windows that are stuck can be opened.

One of the most frequent causes of windows that won't open is accumulated debris or gunk on its moving parts. Grime and dirt build up on sliding tracks, hinges, and locks over time, notes Acme Glass. Additionally, hardware made of metal can rust when it comes into contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent oxidation and keep your window operating well.

The pulleys used to raise or lower the window could become loose, or even break. These components may lose tension and cause obstruction particularly if the window is located at least two stories above the ground.

If you are having difficulty opening a door, you can use a pry-bar to gently push the window repair near me open. Put a block in the frame of the window repair to give the pry bar more leverage. Be careful not to harm the wood or the window. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

Another issue for windows that aren't opening is a defective spring that keeps the window jamb from rising or lowering. Depending on the manufacturer of your windows, you'll need to refer to the owner's manual for additional instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they aren't opening, it's time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from being functional to inoperable. A window that isn’t properly shut could make your home vulnerable to water damage and burglary. Contact our team today for more information on our replacement windows as well as our services!