Don t Buy Into These "Trends" Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case you'll need to source some plastic spacers that will help the new pane to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair near me windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix a loose upvc window repair window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with an ease. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation at the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you advice.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash and frame meet. These can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them realigned or replaced. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and upvc Window repair cozy!

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.